Linux磁带备份,所以我先添加一块硬盘,并相应的建立分区,格式化,然后挂载使用。下面看我操作的步骤:
1.先用Fdisk -l 来查看当前状态下磁盘情况
[root@aaaa ~]# fdisk -l Disk /dev/sda: 300.0 GB, 300000000000 bytes 255 heads, 63 sectors/track, 36472 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 1305 10482381 83 Linux /dev/sda2 1306 2610 10482412+ 82 Linux swap / Solaris /dev/sda3 2611 36472 271996515 83 Linux Disk /dev/hdb: 2147 MB, 2147483648 bytes 16 heads, 63 sectors/track, 4161 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Disk /dev/hdb doesn't contain a valid partition table |
上面红色标识行可以看出,我添加了一块新硬盘/dev/hdb,大小为2G,未分区格式化状态。
2.用Fdisk /dev/hdb来进行分区操作。
[root@linux1 ~]# fdisk /dev/hdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. The number of cylinders for this disk is set to 4161. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): n //输入N表示新建一个分区 Command action e extended p primary partition (1-4) p //p 表示建立一个原始分区 Partition number (1-4): 1 //1 表示此分区编号为1. First cylinder (1-4161, default 1): 1 //1表示使用默认起始柱面号.如果要分多个区的话,先盘算好要多大,再输入数字 Last cylinder or size or sizeM or sizeK (1-4161, default 4161): // 输入: 回车 表示使用默认结束柱面号.即此分区使用整个硬盘空间 Using default value 4161 Command (m for help): w //保存分区 The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. |