参数化的行为表现在不同的层级上:
fixture的参数化:参考 4、fixtures:明确的、模块化的和可扩展的 -- fixture的参数化;
测试用例的参数化:使用@pytest.mark.parametrize可以在测试用例、测试类甚至测试模块中标记多个参数或fixture的组合;
另外,我们也可以通过pytest_generate_tests这个钩子方法自定义参数化的方案;
1. @pytest.mark.parametrize标记
@pytest.mark.parametrize的根本作用是在收集测试用例的过程中,通过对指定参数的赋值来新增被标记对象的调用(执行);
首先,我们来看一下它在源码中的定义:
# _pytest/python.py def parametrize(self, argnames, argvalues, indirect=False, ids=None, scope=None): |
着重分析一下各个参数:
argnames:一个用逗号分隔的字符串,或者一个列表/元组,表明指定的参数名;
对于argnames,实际上我们是有一些限制的:
只能是被标记对象入参的子集:
@pytest.mark.parametrize('input, expected', [(1, 2)]) def test_sample(input): assert input + 1 == 1 |
test_sample中并没有声明expected参数,如果我们在标记中强行声明,会得到如下错误:
In test_sample: function uses no argument 'expected' |
不能是被标记对象入参中,定义了默认值的参数:
@pytest.mark.parametrize('input, expected', [(1, 2)]) def test_sample(input, expected=2): assert input + 1 == expected |
虽然test_sample声明了expected参数,但同时也为其赋予了一个默认值,如果我们在标记中强行声明,会得到如下错误:
In test_sample: function already takes an argument 'expected' with a default value |
会覆盖同名的fixture:
@pytest.fixture() def expected(): return 1 @pytest.mark.parametrize('input, expected', [(1, 2)]) def test_sample(input, expected): assert input + 1 == expected |
test_sample标记中的expected(2)覆盖了同名的fixture expected(1),所以这条用例是可以测试成功的;
argvalues:一个可迭代对象,表明对argnames参数的赋值,具体有以下几种情况:
如果argnames包含多个参数,那么argvalues的迭代返回元素必须是可度量的(即支持len()方法),并且长度和argnames声明参数的个数相等,所以它可以是元组/列表/集合等,表明所有入参的实参:
@pytest.mark.parametrize('input, expected', [(1, 2), [2, 3], set([3, 4])]) def test_sample(input, expected): assert input + 1 == expected |
注意:考虑到集合的去重特性,我们并不建议使用它;
如果argnames只包含一个参数,那么argvalues的迭代返回元素可以是具体的值:
@pytest.mark.parametrize('input', [1, 2, 3]) def test_sample(input): assert input + 1 |
如果你也注意到我们之前提到,argvalues是一个可迭代对象,那么我们就可以实现更复杂的场景;例如:从excel文件中读取实参:
def read_excel(): # 从数据库或者 excel 文件中读取设备的信息,这里简化为一个列表 for dev in ['dev1', 'dev2', 'dev3']: yield dev @pytest.mark.parametrize('dev', read_excel()) def test_sample(dev): assert dev |
实现这个场景有多种方法,你也可以直接在一个fixture中去加载excel中的数据,但是它们在测试报告中的表现会有所区别;
或许你还记得,在上一篇教程(10、skip和xfail标记 -- 结合pytest.param方法)中,我们使用pytest.param为argvalues参数赋值:
@pytest.mark.parametrize( ('n', 'expected'), [(2, 1), pytest.param(2, 1, marks=pytest.mark.xfail(), id='XPASS')]) def test_params(n, expected): assert 2 / n == expected |
现在我们来具体分析一下这个行为:
无论argvalues中传递的是可度量对象(列表、元组等)还是具体的值,在源码中我们都会将其封装成一个ParameterSet对象,它是一个具名元组(namedtuple),包含values, marks, id三个元素:
>>> from _pytest.mark.structures import ParameterSet as PS >>> PS._make([(1, 2), [], None]) ParameterSet(values=(1, 2), marks=[], id=None) |
如果直接传递一个ParameterSet对象会发生什么呢?我们去源码里找答案:
# _pytest/mark/structures.py class ParameterSet(namedtuple("ParameterSet", "values, marks, id")): ... @classmethod def extract_from(cls, parameterset, force_tuple=False): """ :param parameterset: a legacy style parameterset that may or may not be a tuple, and may or may not be wrapped into a mess of mark objects :param force_tuple: enforce tuple wrapping so single argument tuple values don't get decomposed and break tests """ if isinstance(parameterset, cls): return parameterset if force_tuple: return cls.param(parameterset) else: return cls(parameterset, marks=[], id=None) |
可以看到如果直接传递一个ParameterSet对象,那么返回的就是它本身(return parameterset),所以下面例子中的两种写法是等价的:
# src/chapter-11/test_sample.py import pytest from _pytest.mark.structures import ParameterSet @pytest.mark.parametrize( 'input, expected', [(1, 2), ParameterSet(values=(1, 2), marks=[], id=None)]) def test_sample(input, expected): assert input + 1 == expected |
到这里,或许你已经猜到了,pytest.param的作用就是封装一个ParameterSet对象;那么我们去源码里求证一下吧!
# _pytest/mark/__init__.py def param(*values, **kw): """Specify a parameter in `pytest.mark.parametrize`_ calls or :ref:`parametrized fixtures <fixture-parametrize-marks>`. .. code-block:: python @pytest.mark.parametrize("test_input,expected", [ ("3+5", 8), pytest.param("6*9", 42, marks=pytest.mark.xfail), ]) def test_eval(test_input, expected): assert eval(test_input) == expected :param values: variable args of the values of the parameter set, in order. :keyword marks: a single mark or a list of marks to be applied to this parameter set. :keyword str id: the id to attribute to this parameter set. """ return ParameterSet.param(*values, **kw) |
正如我们所料,现在你应该更明白怎么给argvalues传参了吧;
indirect:argnames的子集或者一个布尔值;将指定参数的实参通过request.param重定向到和参数同名的fixture中,以此满足更复杂的场景;
具体使用方法可以参考以下示例:
# src/chapter-11/test_indirect.py import pytest @pytest.fixture() def max(request): return request.param - 1 @pytest.fixture() def min(request): return request.param + 1 # 默认 indirect 为 False @pytest.mark.parametrize('min, max', [(1, 2), (3, 4)]) def test_indirect(min, max): assert min <= max # min max 对应的实参重定向到同名的 fixture 中 @pytest.mark.parametrize('min, max', [(1, 2), (3, 4)], indirect=True) def test_indirect_indirect(min, max): assert min >= max # 只将 max 对应的实参重定向到 fixture 中 @pytest.mark.parametrize('min, max', [(1, 2), (3, 4)], indirect=['max']) def test_indirect_part_indirect(min, max): assert min == max |
ids:一个可执行对象,用于生成测试ID,或者一个列表/元组,指明所有新增用例的测试ID;
如果使用列表/元组直接指明测试ID,那么它的长度要等于argvalues的长度:
@pytest.mark.parametrize('input, expected', [(1, 2), (3, 4)], ids=['first', 'second']) def test_ids_with_ids(input, expected): pass |
搜集到的测试ID如下:
collected 2 items <Module test_ids.py> <Function test_ids_with_ids[first]> <Function test_ids_with_ids[second]> |
如果指定了相同的测试ID,pytest会在后面自动添加索引:
@pytest.mark.parametrize('input, expected', [(1, 2), (3, 4)], ids=['num', 'num']) def test_ids_with_ids(input, expected): pass |
搜集到的测试ID如下:
collected 2 items <Module test_ids.py> <Function test_ids_with_ids[num0]> <Function test_ids_with_ids[num1]> |
如果在指定的测试ID中使用了非ASCII的值,默认显示的是字节序列:
@pytest.mark.parametrize('input, expected', [(1, 2), (3, 4)], ids=['num', '中文']) def test_ids_with_ids(input, expected): pass |
搜集到的测试ID如下:
collected 2 items <Module test_ids.py> <Function test_ids_with_ids[num]> <Function test_ids_with_ids[\u4e2d\u6587]> |
可以看到我们期望显示中文,实际上显示的是\u4e2d\u6587;
如果我们想要得到期望的显示,该怎么办呢?去源码里找答案:
# _pytest/python.py def _ascii_escaped_by_config(val, config): if config is None: escape_option = False else: escape_option = config.getini( "disable_test_id_escaping_and_forfeit_all_rights_to_community_support" ) return val if escape_option else ascii_escaped(val) |
我们可以通过在pytest.ini中使能disable_test_id_escaping_and_forfeit_all_rights_to_community_support选项来避免这种情况:
[pytest] disable_test_id_escaping_and_forfeit_all_rights_to_community_support = True |
再次搜集到的测试ID如下:
<Module test_ids.py> <Function test_ids_with_ids[num]> <Function test_ids_with_ids[中文]> |
如果通过一个可执行对象生成测试ID:
def idfn(val): # 将每个 val 都加 1 return val + 1 @pytest.mark.parametrize('input, expected', [(1, 2), (3, 4)], ids=idfn) def test_ids_with_ids(input, expected): pass |
搜集到的测试ID如下:
collected 2 items <Module test_ids.py> <Function test_ids_with_ids[2-3]> <Function test_ids_with_ids[4-5]> |
通过上面的例子我们可以看到,对于一个具体的argvalues参数(1, 2)来说,它被拆分为1和2分别传递给idfn,并将返回值通过-符号连接在一起作为一个测试ID返回,而不是将(1, 2)作为一个整体传入的;
下面我们在源码中看看是如何实现的:
# _pytest/python.py def _idvalset(idx, parameterset, argnames, idfn, ids, item, config): if parameterset.id is not None: return parameterset.id if ids is None or (idx >= len(ids) or ids[idx] is None): this_id = [ _idval(val, argname, idx, idfn, item=item, config=config) for val, argname in zip(parameterset.values, argnames) ] return "-".join(this_id) else: return _ascii_escaped_by_config(ids[idx], config) |
和我们猜想的一样,先通过zip(parameterset.values, argnames)将argnames和argvalues的值一一对应,再将处理过的返回值通过"-".join(this_id)连接;
另外,如果我们足够细心,从上面的源码中还可以看出,假设已经通过pytest.param指定了id属性,那么将会覆盖ids中对应的测试ID,我们来证实一下:
@pytest.mark.parametrize( 'input, expected', [(1, 2), pytest.param(3, 4, id='id_via_pytest_param')], ids=['first', 'second']) def test_ids_with_ids(input, expected): pass |
搜集到的测试ID如下:
collected 2 items <Module test_ids.py> <Function test_ids_with_ids[first]> <Function test_ids_with_ids[id_via_pytest_param]> |
测试ID是id_via_pytest_param,而不是second;
讲了这么多ids的用法,对我们有什么用呢?
我觉得,其最主要的作用就是更进一步的细化测试用例,区分不同的测试场景,为有针对性的执行测试提供了一种新方法;
例如,对于以下测试用例,可以通过-k 'Window and not Non'选项,只执行和Windows相关的场景:
# src/chapter-11/test_ids.py import pytest @pytest.mark.parametrize('input, expected', [ pytest.param(1, 2, id='Windows'), pytest.param(3, 4, id='Windows'), pytest.param(5, 6, id='Non-Windows') ]) def test_ids_with_ids(input, expected): pass |
scope:声明argnames中参数的作用域,并通过对应的argvalues实例划分测试用例,进而影响到测试用例的收集顺序;
如果我们显式的指明scope参数;例如,将参数作用域声明为模块级别:
# src/chapter-11/test_scope.py import pytest @pytest.mark.parametrize('test_input, expected', [(1, 2), (3, 4)], scope='module') def test_scope1(test_input, expected): pass @pytest.mark.parametrize('test_input, expected', [(1, 2), (3, 4)], scope='module') def test_scope2(test_input, expected): pass |
搜集到的测试用例如下:
collected 4 items <Module test_scope.py> <Function test_scope1[1-2]> <Function test_scope2[1-2]> <Function test_scope1[3-4]> <Function test_scope2[3-4]> |
以下是默认的收集顺序,我们可以看到明显的差别:
collected 4 items <Module test_scope.py> <Function test_scope1[1-2]> <Function test_scope1[3-4]> <Function test_scope2[1-2]> <Function test_scope2[3-4]> |
scope未指定的情况下(或者scope=None),当indirect等于True或者包含所有的argnames参数时,作用域为所有fixture作用域的最小范围;否则,其永远为function;
# src/chapter-11/test_scope.py @pytest.fixture(scope='module') def test_input(request): pass @pytest.fixture(scope='module') def expected(request): pass @pytest.mark.parametrize('test_input, expected', [(1, 2), (3, 4)], indirect=True) def test_scope1(test_input, expected): pass @pytest.mark.parametrize('test_input, expected', [(1, 2), (3, 4)], indirect=True) def test_scope2(test_input, expected): pass |
test_input和expected的作用域都是module,所以参数的作用域也是module,用例的收集顺序和上一节相同:
collected 4 items <Module test_scope.py> <Function test_scope1[1-2]> <Function test_scope2[1-2]> <Function test_scope1[3-4]> <Function test_scope2[3-4]> |
1.1. empty_parameter_set_mark选项
默认情况下,如果@pytest.mark.parametrize的argnames中的参数没有接收到任何的实参的话,用例的结果将会被置为SKIPPED;
例如,当python版本小于3.8时返回一个空的列表(当前Python版本为3.7.3):
# src/chapter-11/test_empty.py import pytest import sys def read_value(): if sys.version_info >= (3, 8): return [1, 2, 3] else: return [] @pytest.mark.parametrize('test_input', read_value()) def test_empty(test_input): assert test_input |
我们可以通过在pytest.ini中设置empty_parameter_set_mark选项来改变这种行为,其可能的值为:
skip:默认值
xfail:跳过执行直接将用例标记为XFAIL,等价于xfail(run=False)
fail_at_collect:上报一个CollectError异常;
1.2. 多个标记组合
如果一个用例标记了多个@pytest.mark.parametrize标记,如下所示:
# src/chapter-11/test_multi.py @pytest.mark.parametrize('test_input', [1, 2, 3]) @pytest.mark.parametrize('test_output, expected', [(1, 2), (3, 4)]) def test_multi(test_input, test_output, expected): pass |
实际收集到的用例,是它们所有可能的组合:
collected 6 items <Module test_multi.py> <Function test_multi[1-2-1]> <Function test_multi[1-2-2]> <Function test_multi[1-2-3]> <Function test_multi[3-4-1]> <Function test_multi[3-4-2]> <Function test_multi[3-4-3]> |
1.3. 标记测试模块
我们可以通过对pytestmark赋值,参数化一个测试模块:
# src/chapter-11/test_module.py import pytest pytestmark = pytest.mark.parametrize('test_input, expected', [(1, 2), (3, 4)]) def test_module(test_input, expected): assert test_input + 1 == expected |
2. pytest_generate_tests钩子方法
pytest_generate_tests方法在测试用例的收集过程中被调用,它接收一个metafunc对象,我们可以通过其访问测试请求的上下文,更重要的是,可以使用metafunc.parametrize方法自定义参数化的行为;
我们先看看源码中是怎么使用这个方法的:
# _pytest/python.py def pytest_generate_tests(metafunc): # those alternative spellings are common - raise a specific error to alert # the user alt_spellings = ["parameterize", "parametrise", "parameterise"] for mark_name in alt_spellings: if metafunc.definition.get_closest_marker(mark_name): msg = "{0} has '{1}' mark, spelling should be 'parametrize'" fail(msg.format(metafunc.function.__name__, mark_name), pytrace=False) for marker in metafunc.definition.iter_markers(name="parametrize"): metafunc.parametrize(*marker.args, **marker.kwargs) |
首先,它检查了parametrize的拼写错误,如果你不小心写成了["parameterize", "parametrise", "parameterise"]中的一个,pytest会返回一个异常,并提示正确的单词;然后,循环遍历所有的parametrize的标记,并调用metafunc.parametrize方法;
现在,我们来定义一个自己的参数化方案:
在下面这个用例中,我们检查给定的stringinput是否只由字母组成,但是我们并没有为其打上parametrize标记,所以stringinput被认为是一个fixture:
# src/chapter-11/test_strings.py def test_valid_string(stringinput): assert stringinput.isalpha() |
现在,我们期望把stringinput当成一个普通的参数,并且从命令行赋值:
首先,我们定义一个命令行选项:
# src/chapter-11/conftest.py def pytest_addoption(parser): parser.addoption( "--stringinput", action="append", default=[], help="list of stringinputs to pass to test functions", ) |
然后,我们通过pytest_generate_tests方法,将stringinput的行为由fixtrue改成parametrize:
# src/chapter-11/conftest.py def pytest_generate_tests(metafunc): if "stringinput" in metafunc.fixturenames: metafunc.parametrize("stringinput", metafunc.config.getoption("stringinput")) |
最后,我们就可以通过--stringinput命令行选项来为stringinput参数赋值了:
λ pipenv run pytest -q --stringinput='hello' --stringinput='world' src/chapter-11/test_strings.py .. [100%] 2 passed in 0.02s |
如果我们不加--stringinput选项,相当于parametrize的argnames中的参数没有接收到任何的实参,那么测试用例的结果将会置为SKIPPED
λ pipenv run pytest -q src/chapter-11/test_strings.py s [100%] 1 skipped in 0.02s |
注意:
不管是metafunc.parametrize方法还是@pytest.mark.parametrize标记,它们的参数(argnames)不能是重复的,否则会产生一个错误:ValueError: duplicate 'stringinput';
本文内容不用于商业目的,如涉及知识产权问题,请权利人联系博为峰小编(021-64471599-8017),我们将立即处理