[转]大数据量分页存储过程效率测试附代码
如果本文的原作者经过,麻烦留下脚印。本人非常尊重原作,在此一不小心从转上摘得,有冒犯之处,尽请见谅。
在项目中,我们经常遇到或用到分页,那么在大数据量(百万级以上)下,哪种分页算法效率最优呢?我们不妨用事实说话。
测试环境
硬件:CPU 酷睿双核T5750 内存:2G
软件:Windows server 2003 + Sql server 2005
OK,我们首先创建一数据库:data_Test,并在此数据库中创建一表:tb_TestTable
create database data_Test --创建数据库data_Test
GO
use data_Test
GO
create table tb_TestTable --创建表
(
id int identity(1,1) primary key,
userName nvarchar(20) not null,
userPWD nvarchar(20) not null,
userEmail nvarchar(40) null
)
GO
然后我们在数据表中插入2000000条数据:
--插入数据
set identity_insert tb_TestTable on
declare @count int
set @count=1
while @count<=2000000
begin
insert into tb_TestTable(id,userName,userPWD,userEmail) values
(@count,'admin','admin888','lli0077@yahoo.com.cn')
set @count=@count+1
end
set identity_insert tb_TestTable off
我首先写了五个常用存储过程:
1,利用select top 和select not in进行分页,具体代码如下:
create procedure proc_paged_with_notin --利用select top and select not in
(
@pageIndex int, --页索引
@pageSize int --每页记录数
)
as
begin
set nocount on;
declare @timediff datetime --耗时
declare @sql nvarchar(500)
select @timediff=Getdate()
set @sql='select top '+str(@pageSize)+' * from tb_TestTable where(ID not in(select top '+str(@pageSize*@pageIndex)+' id from tb_TestTable order by ID ASC)) order by ID'
execute(@sql) --因select top后不支技直接接参数,所以写成了字符串@sql
select datediff(ms,@timediff,GetDate()) as 耗时
set nocount off;
end
2,利用select top 和 select max(列键)
create procedure proc_paged_with_selectMax --利用select top and select max(列)
(
@pageIndex int, --页索引
@pageSize int --页记录数
)
as
begin
set nocount on;
declare @timediff datetime
declare @sql nvarchar(500)
select @timediff=Getdate()
set @sql='select top '+str(@pageSize)+' * From tb_TestTable where(ID>(select max(id) From (select top '+str(@pageSize*@pageIndex)+' id From tb_TestTable order by ID) as TempTable)) order by ID'
execute(@sql)
select datediff(ms,@timediff,GetDate()) as 耗时
set nocount off;
end
3,利用select top和中间变量--此方法因网上有人说效果最佳,所以贴出来一同测试
create procedure proc_paged_with_Midvar --利用ID>最大ID值和中间变量
(
@pageIndex int,
@pageSize int
)
as
declare @count int
declare @ID int
declare @timediff datetime
declare @sql nvarchar(500)
begin
set nocount on;
select @count=0,@ID=0,@timediff=getdate()
select @count=@count+1,@ID=case when @count<=@pageSize*@pageIndexthen ID else @ID end from tb_testTable order by id
set @sql='select top '+str(@pageSize)+' * from tb_testTable where ID>'+str(@ID)
execute(@sql)
select datediff(ms,@timediff,getdate()) as 耗时
set nocount off;
end
4,利用Row_number() 此方法为SQL server 2005中新的方法,利用Row_number()给数据行加上索引
create procedure proc_paged_with_Rownumber --利用SQL 2005中的Row_number()
(
@pageIndex int,
@pageSize int
)
as
declare @timediff datetime
begin
set nocount on;
select @timediff=getdate()
select * from (select *,Row_number() over(order by ID asc) as IDRank from tb_testTable) as IDWithRowNumber where IDRank>@pageSize*@pageIndex and IDRank<@pageSize*(@pageIndex+1)
select datediff(ms,@timediff,getdate()) as 耗时
set nocount off;
end
5,利用临时表及Row_number
create procedure proc_CTE --利用临时表及Row_number
(
@pageIndex int, --页索引
@pageSize int --页记录数
)
as
set nocount on;
declare @ctestr nvarchar(400)
declare @strSql nvarchar(400)
declare @datediff datetime
begin
select @datediff=GetDate()
set @ctestr='with Table_CTE as
(select ceiling((Row_number() over(order by ID ASC))/'+str(@pageSize)+') as page_num,* from tb_TestTable)';
set @strSql=@ctestr+' select * From Table_CTE where page_num='+str(@pageIndex)
end
begin
execute sp_executesql @strSql
select datediff(ms,@datediff,GetDate())
set nocount off;
end
OK,至此,存储过程创建完毕,我们分别在每页10条数据的情况下在第2页,第1000页,第10000页,第100000页,第199999页进行测试,耗时单位:ms 每页测试5次取其平均值
存过第2页耗时第1000页第10000页第100000页第199999页效率排行
1用not in0ms16ms47ms475ms953ms3
2用select max5ms16ms35ms325ms623ms1
3中间变量966ms970ms960ms945ms933ms5
4row_number0ms0ms34ms365ms710ms2
5临时表780ms796ms798ms780ms805ms4
测试结果显示:
输出窗口复制 保存
select max >row_number>not in>临时表>中间变量
于是我对效率最高的select max方法用2分法进行了扩展,代码取自互联网,我修改了ASC排序时取不到值的BUG,测试结果:
存过第2页耗时第1000页第10000页第100000页第199999页效率排行
2分法156ms156ms180ms470ms156ms1*
从测试结果来看,使用2分法确实可以提高效率并使效率更为稳定,我又增加了第159999页的测试,用时仅296ms,效果相当的不错!
下面是2分法使用select max的代码,已相当完善。
--/*-----存储过程 分页处理 孙伟 2005-03-28创建 -------*/
--/*-----存储过程 分页处理 浪尘 2008-9-1修改----------*/
--/*----- 对数据进行了2分处理使查询前半部分数据与查询后半部分数据性能相同 -------*/
alter PROCEDURE proc_paged_2part_selectMax
(
@tblName nvarchar(200), ----要显示的表或多个表的连接
@fldName nvarchar(500) = '*', ----要显示的字段列表
@pageSize int = 10, ----每页显示的记录个数
@page int = 1, ----要显示那一页的记录
@fldSort nvarchar(200) = null, ----排序字段列表或条件
@Sort bit = 0, ----排序方法,0为升序,1为降序(如果是多字段排列Sort指代最后一个排序字段的排列顺序(最后一个排序字段不加排序标记)--程序传参如:' SortA Asc,SortB Desc,SortC ')
@strCondition nvarchar(1000) = null, ----查询条件,不需where
@ID nvarchar(150), ----主表的主键
@Dist bit = 0, ----是否添加查询字段的 DISTINCT 默认0不添加/1添加
@pageCount int = 1 output, ----查询结果分页后的总页数
@Counts int = 1 output ----查询到的记录数
)
AS
SET NOCOUNT ON
Declare @sqlTmp nvarchar(1000) ----存放动态生成的SQL语句
Declare @strTmp nvarchar(1000) ----存放取得查询结果总数的查询语句
Declare @strID nvarchar(1000) ----存放取得查询开头或结尾ID的查询语句
Declare @strSortType nvarchar(10) ----数据排序规则A
Declare @strFSortType nvarchar(10) ----数据排序规则B
Declare @SqlSelect nvarchar(50) ----对含有DISTINCT的查询进行SQL构造
Declare @SqlCounts nvarchar(50) ----对含有DISTINCT的总数查询进行SQL构造
declare @timediff datetime --耗时测试时间差
select @timediff=getdate()
if @Dist = 0
begin
set @SqlSelect = 'select '
set @SqlCounts = 'Count(*)'
end
else
begin
set @SqlSelect = 'select distinct '
set @SqlCounts = 'Count(DISTINCT'+@ID+')'
end
if @Sort=0
begin
set @strFSortType=' ASC '
set @strSortType=' DESC '
end
else
begin
set @strFSortType=' DESC '
set @strSortType=' ASC '
end
--------生成查询语句--------
--此处@strTmp为取得查询结果数量的语句
if @strCondition is null or @strCondition='' --没有设置显示条件
begin
set @sqlTmp = @fldName + ' From ' + @tblName
set @strTmp = @SqlSelect+' @Counts='+@SqlCounts+' FROM'+@tblName
set @strID = ' From ' + @tblName
end
else
begin
set @sqlTmp = + @fldName + 'From ' + @tblName + ' where (1>0) ' + @strCondition
set @strTmp = @SqlSelect+' @Counts='+@SqlCounts+' FROM'+@tblName+ ' where (1>0) ' + @strCondition
set @strID = ' From ' + @tblName + ' where (1>0) ' + @strCondition
end
----取得查询结果总数量-----
exec sp_executesql @strTmp,N'@Counts int out ',@Counts out
declare @tmpCounts int
if @Counts = 0
set @tmpCounts = 1
else
set @tmpCounts = @Counts
--取得分页总数
set @pageCount=(@tmpCounts+@pageSize-1)/@pageSize
/**当前页大于总页数 取最后一页**/
if @page>@pageCount
set @page=@pageCount
--/*-----数据分页2分处理-------*/
declare @pageIndex int --总数/页大小
declare @lastcount int --总数%页大小
set @pageIndex = @tmpCounts/@pageSize
set @lastcount = @tmpCounts%@pageSize
if @lastcount > 0
set @pageIndex = @pageIndex + 1
else
set @lastcount = @pagesize
--//***显示分页
if @strCondition is null or @strCondition='' --没有设置显示条件
begin
if @pageIndex<2 or @page<=@pageIndex/ 2 + @pageIndex % 2 --前半部分数据处理
begin
if @page=1
set @strTmp=@SqlSelect+' top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' order by '+ @fldSort +' '+ @strFSortType
else
begin
if @Sort=1
begin
set @strTmp=@SqlSelect+' top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where'+@ID+'<(select min('+ @ID +') from ('+ @SqlSelect+' top '+ CAST(@pageSize*(@page-1) as Varchar(20)) +' '+ @ID +' from'+@tblName
+' order by '+ @fldSort +' '+ @strFSortType+') AS TBMinID)'
+' order by '+ @fldSort +' '+ @strFSortType
end
else
begin
set @strTmp=@SqlSelect+' top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where'+@ID+'>(select max('+ @ID +') from ('+ @SqlSelect+' top '+ CAST(@pageSize*(@page-1) as Varchar(20)) +' '+ @ID +' from'+@tblName
+' order by '+ @fldSort +' '+ @strFSortType+') AS TBMinID)'
+' order by '+ @fldSort +' '+ @strFSortType
end
end
end
else
begin
set @page = @pageIndex-@page+1 --后半部分数据处理
if @page <= 1 --最后一页数据显示
set @strTmp=@SqlSelect+' * from ('+@SqlSelect+'top '+ CAST(@lastcount as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' order by '+ @fldSort +' '+ @strSortType+') AS TempTB'+' order by '+ @fldSort +' '+ @strFSortType
else
if @Sort=1
begin
set @strTmp=@SqlSelect+' * from ('+@SqlSelect+'top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where'+@ID+'>(select max('+ @ID +') from('+ @SqlSelect+' top '+ CAST(@pageSize*(@page-2)+@lastcount as Varchar(20)) +' '+ @ID +' from'+@tblName
+' order by '+ @fldSort +' '+ @strSortType+') AS TBMaxID)'
+' order by '+ @fldSort +' '+ @strSortType+') AS TempTB'+' order by '+ @fldSort +' '+ @strFSortType
end
else
begin
set @strTmp=@SqlSelect+' * from ('+@SqlSelect+'top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where'+@ID+'<(select min('+ @ID +') from('+ @SqlSelect+' top '+ CAST(@pageSize*(@page-2)+@lastcount as Varchar(20)) +' '+ @ID +' from'+@tblName
+' order by '+ @fldSort +' '+ @strSortType+') AS TBMaxID)'
+' order by '+ @fldSort +' '+ @strSortType+') AS TempTB'+' order by '+ @fldSort +' '+ @strFSortType
end
end
end
else --有查询条件
begin
if @pageIndex<2 or @page<=@pageIndex/ 2 + @pageIndex % 2 --前半部分数据处理
begin
if @page=1
set @strTmp=@SqlSelect+' top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where 1=1 ' + @strCondition + ' order by '+ @fldSort +' '+ @strFSortType
else if(@Sort=1)
begin
set @strTmp=@SqlSelect+' top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where'+@ID+'<(select min('+ @ID +') from ('+ @SqlSelect+' top '+ CAST(@pageSize*(@page-1) as Varchar(20)) +' '+ @ID +' from'+@tblName
+' where (1=1) ' + @strCondition +' order by '+ @fldSort +' '+ @strFSortType+') AS TBMinID)'
+' '+ @strCondition +' order by '+ @fldSort +' '+ @strFSortType
end
else
begin
set @strTmp=@SqlSelect+' top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where'+@ID+'>(select max('+ @ID +') from ('+ @SqlSelect+' top '+ CAST(@pageSize*(@page-1) as Varchar(20)) +' '+ @ID +' from'+@tblName
+' where (1=1) ' + @strCondition +' order by '+ @fldSort +' '+ @strFSortType+') AS TBMinID)'
+' '+ @strCondition +' order by '+ @fldSort +' '+ @strFSortType
end
end
else
begin
set @page = @pageIndex-@page+1 --后半部分数据处理
if @page <= 1 --最后一页数据显示
set @strTmp=@SqlSelect+' * from ('+@SqlSelect+'top '+ CAST(@lastcount as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where (1=1) '+ @strCondition +' order by '+ @fldSort +' '+ @strSortType+') AS TempTB'+' order by '+ @fldSort +' '+ @strFSortType
else if(@Sort=1)
set @strTmp=@SqlSelect+' * from ('+@SqlSelect+'top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where'+@ID+'>(select max('+ @ID +') from('+ @SqlSelect+' top '+ CAST(@pageSize*(@page-2)+@lastcount as Varchar(20)) +' '+ @ID +' from'+@tblName
+' where (1=1) '+ @strCondition +' order by '+ @fldSort +' '+ @strSortType+') AS TBMaxID)'
+' '+ @strCondition+' order by '+ @fldSort +' '+ @strSortType+') AS TempTB'+' order by '+ @fldSort +' '+ @strFSortType
else
set @strTmp=@SqlSelect+' * from ('+@SqlSelect+'top '+ CAST(@pageSize as VARCHAR(4))+' '+ @fldName+' from'+@tblName
+' where'+@ID+'<(select min('+ @ID +') from('+ @SqlSelect+' top '+ CAST(@pageSize*(@page-2)+@lastcount as Varchar(20)) +' '+ @ID +' from'+@tblName
+' where (1=1) '+ @strCondition +' order by '+ @fldSort +' '+ @strSortType+') AS TBMaxID)'
+' '+ @strCondition+' order by '+ @fldSort +' '+ @strSortType+') AS TempTB'+' order by '+ @fldSort +' '+ @strFSortType
end
end
------返回查询结果-----
exec sp_executesql @strTmp
select datediff(ms,@timediff,getdate()) as 耗时
--print @strTmp
SET NOCOUNT OFF
GO
执行示例:
exec proc_paged_2part_selectMax 'tb_testTable','ID,userName,userPWD,userEmail',10,100000,'ID',0,null,'ID',0
这种测试只在单机进行,并且没有在实际开发WEB项目中分页测试,测试项也比较单一,所以不够全面系统,但从其效率相比上,我们可以在数据库分页算法上进行有效的控制。
相关阅读:
- 轻量级qtp自动化测试框架改良 (wangpl4092, 2010-3-17)
- IBM将提供软件开发测试商用云服务 (flying-kite, 2010-3-17)
- 如何对Web应用程序进行负载测试 (wangpl4092, 2010-3-18)
- 性能测试概述 (luoluolan, 2010-3-23)
- 食品业初级岗位缺人 软件测试业缺口30万 (51jobber, 2010-3-24)
- 测试自动化= 测试活动的自动化 (hobli, 2010-4-07)
- [转来的]一名合格的测试员应具备的素质 (sweetxmy, 2010-4-22)
- FEST-Swing -Swing GUI testing (zhoujun0121, 2010-4-24)
- 致给我留言要求进一步沟通的测试友人 (sweetxmy, 2010-5-20)
TAG: 测试
标题搜索
日历
|
|||||||||
日 | 一 | 二 | 三 | 四 | 五 | 六 | |||
1 | 2 | ||||||||
3 | 4 | 5 | 6 | 7 | 8 | 9 | |||
10 | 11 | 12 | 13 | 14 | 15 | 16 | |||
17 | 18 | 19 | 20 | 21 | 22 | 23 | |||
24 | 25 | 26 | 27 | 28 | 29 | 30 | |||
31 |
我的存档
数据统计
- 访问量: 80891
- 日志数: 104
- 图片数: 4
- 建立时间: 2008-05-27
- 更新时间: 2011-07-21