在本文中,通过核心java学习笔记,我们将讨论Redis和MySQL的性能基准测试。 我们将从在Ubuntu上引入和安装Redis开始。 然后,我们将朝着这两者之间的基准测试迈进。码了很多专业的相关知识, 分享给大家参考学习。
1、Redis简介
根据官方网站的说法,Redis是一种开源(BSD许可)的内存中数据结构存储,用作数据库,缓存和消息代理。 实际上,Redis是高级键值存储。 它具有超高的吞吐率,因此超快,因为它每秒可以执行约110000个SET,每秒执行约81000个GET。 它还支持一组非常丰富的数据类型来存储。 实际上,Redis每次都将数据保留在内存中,但也保留在磁盘上。 因此,这需要权衡:惊人的速度和数据集的大小限制(根据内存)。 在本文中,为了有一些与MySQL相比的基准,我们将仅使用Redis作为缓存引擎。
2、先决条件
在计算机上安装/配置了PHP,如果没有,请转到此处:如何在Ubuntu 16.04上安装PHP
在你的计算机上安装/配置了MySQL,如果没有,请转到此处:如何在Ubuntu 16.04上安装MySQL
3、在Ubuntu上安装Redis
首先,运行以下命令:
sudo apt update sudo apt install redis-server |
这些命令将更新apt软件包并在Ubuntu计算机上安装Redis。
现在,事实上,要启用Redis用作服务,你需要通过更新Redis配置文件中存在的受监管指令来对其进行配置。你可以在这里轻松找到配置文件:
sudo vi /etc/redis/redis.conf |
默认情况下,受监管的指令设置为“否”。你需要将其设置为:systemd。 更新后,配置文件的这一部分将类似于以下内容:
################################# GENERAL ##################################### # By default Redis does not run as a daemon. Use 'yes' if you need it. # Note that Redis will write a pid file in /var/run/redis.pid when daemonized. daemonize yes # If you run Redis from upstart or systemd, Redis can interact with your # supervision tree. Options: # supervised no - no supervision interaction # supervised upstart - signal upstart by putting Redis into SIGSTOP mode # supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET # supervised auto - detect upstart or systemd method based on # UPSTART_JOB or NOTIFY_SOCKET environment variables # Note: these supervision methods only signal "process is ready." # They do not enable continuous liveness pings back to your supervisor. supervised systemd # If a pid file is specified, Redis writes it where specified at startup # and removes it at exit. # # When the server runs non daemonized, no pid file is created if none is # specified in the configuration. When the server is daemonized, the pid file # is used even if not specified, defaulting to "/var/run/redis.pid". # # Creating a pid file is best effort: if Redis is not able to create it # nothing bad happens, the server will start and run normally. pidfile /var/run/redis/redis-server.pid # Specify the server verbosity level. # This can be one of: # debug (a lot of information, useful for development/testing) # verbose (many rarely useful info, but not a mess like the debug level) # notice (moderately verbose, what you want in production probably) |
4、启用密码验证:
使用密码身份验证配置Redis不是强制性的,但是它非常重要(并且也很容易),因为它启用了Redis的安全因素。 使用密码配置我们的Redis服务器非常简单,可以通过上述相同的配置文件来完成。 因此,打开配置文件并查找``requirepass''指令。你将默认情况下注释该行,只需取消注释并在此处输入密码即可。配置文件将类似于以下内容:
# Require clients to issue AUTH <PASSWORD> before processing any other # commands. This might be useful in environments in which you do not trust # others with access to the host running redis-server. # # This should stay commented out for backward compatibility and because most # people do not need auth (e.g. they run their own servers). # # Warning: since Redis is pretty fast an outside user can try up to # 150k passwords per second against a good box. This means that you should # use a very strong password otherwise it will be very easy to break. requirepass yourpasswordhere # Command renaming. # # It is possible to change the name of dangerous commands in a shared # environment. For instance the CONFIG command may be renamed into something # hard to guess so that it will still be available for internal-use tools # but not available for general clients. # # Example: # # rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 |
立即保存此文件,并使更改反映在Redis上,请使用以下命令重新启动Redis服务:
sudo systemctl restart redis.service |
5、在Ubuntu上安装PHPRedis:
现在,要使你的PHP代码能够将Redis用作服务:
·运行以下命令以安装PHPRedis扩展名:
sudo apt-get install php-redis |
·将以下行添加到你的php.ini文件中:
extension=redis.so |
6、工作流程
·仅使用MySQL:
在[1,10000]之间随机生成一个密钥,并在MySQL数据库中搜索该密钥
o请记下这样做所花费的时间
应使用时间样本来处理n个此类请求,同时将n逐渐增加为1、10、100、1000、10000、100000、1000000、1000000
使用MySQL和Redis:
机生成一个介于[1,10000]之间的密钥
将检查该密钥是否已经存在/存储在我们的Redis中
§如果Redis上有它,我们不会打MySQL
§如果Redis中不存在该密钥,我们将在MySQL数据库中搜索该密钥,并将该密钥存储到Redis
o请记下这样做所花费的时间应使用时间样本来处理
n个此类请求,同时将n逐渐增加为1、10、100、1000、10000、100000、1000000、1000000
7、源代码
仅MySQL源代码
(当我们尝试仅从MySQL获取密钥时):
<?php $con = mysqli_connect("localhost","root","admin","blog_db"); for($i = 1; $i <= 10000000; $i = $i *10) { $startTime = microtime(true); for($j = 1; $j <= $i; $j++) { $rand = rand(1, 100000); $sql = "SELECT VALUE from data WHERE `key` = $rand"; if (!mysqli_query($con, $sql)) { echo "Error: " . $sql . "" . mysqli_error($con); } } $endTime = microtime(true); file_put_contents('/home/ayush/Desktop/temp/blog/mysqlonly.log', $i . ',' . ($endTime - $startTime) . "\n" , FILE_APPEND); } |
8、MySQL和Redis源代码
(当我们尝试先从Redis获取一个密钥,然后在无法在Redis上找到该密钥的情况下,从MySQL获取密钥时):
<?php $con = mysqli_connect("localhost","root","admin","blog_db"); $client = new Redis(); $client->connect('localhost'); for($i = 1; $i <= 10000000; $i = $i *10) { $startTime = microtime(true); for($j = 1; $j <= $i; $j++) { $rand = rand(1, 100000); if(!$client->exists($rand)) { $client->set($rand, $rand); $sql = "SELECT VALUE from data WHERE `key` = $rand"; if (!mysqli_query($con, $sql)) { echo "Error: " . $sql . "" . mysqli_error($con); } } } $endTime = microtime(true); file_put_contents('/home/ayush/Desktop/temp/blog/redis.log', $i . ',' . ($endTime - $startTime) . "\n" , FILE_APPEND); $client->flushAll(); } |
基准测试
表格数据
结论
从上面给出的图形表示可以很容易地看出,随着请求数量的显着增加,
Redis的性能开始显着提高。 因此,如果处理的请求数量很大,则将Redis这样的缓存引擎与数据库一起使用是一个好主意。
本文内容不用于商业目的,如涉及知识产权问题,请权利人联系博为峰小编(021-64471599-8017),我们将立即处理