Linux netstat命令详解
上一篇 / 下一篇 2015-05-04 10:56:40 / 个人分类:linux
简介
Netstat 命令用于显示各种网络相关信息,如网络连接,路由表,接口状态 (Interface Statistics),masquerade 连接,多播成员 (Multicast Memberships) 等等。
输出信息含义
执行netstat后,其输出结果为
Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp02210.34.6.89:telnet210.34.6.96:2873ESTABLISHED tcp2960210.34.6.89:1165210.34.6.84:netbios-ssn ESTABLISHED tcp00localhost.localdom:9001localhost.localdom:1162ESTABLISHED tcp00localhost.localdom:1162localhost.localdom:9001ESTABLISHED tcp080210.34.6.89:1161210.34.6.10:netbios-ssn CLOSE Active UNIX domain sockets (w/o servers) Proto RefCnt Flags Type State I-Node Path unix1[ ] STREAM CONNECTED16178@000000dd unix1[ ] STREAM CONNECTED16176@000000dc unix9[ ] DGRAM5292/dev/log unix1[ ] STREAM CONNECTED16182@000000df
从整体上看,netstat的输出结果可以分为两个部分:
一个是Active Internet connections,称为有源TCP连接,其中"Recv-Q"和"Send-Q"指%0A的是接收队列和发送队列。这些数字一般都应该是0。如果不是则表示软件包正在队列中堆积。这种情况只能在非常少的情况见到。
另一个是Active UNIX domain sockets,称为有源Unix域套接口(和网络套接字一样,但是只能用于本机通信,性能可以提高一倍)。
Proto显示连接使用的协议,RefCnt表示连接到本套接口上的进程号,Types显示套接口的类型,State显示套接口当前的状态,Path表示连接到套接口的其它进程使用的路径名。
常见参数
-a (all)显示所有选项,默认不显示LISTEN相关
-t (tcp)仅显示tcp相关选项
-u (udp)仅显示udp相关选项
-n 拒绝显示别名,能显示数字的全部转化成数字。
-l 仅列出有在 Listen (监听) 的服務状态
-p 显示建立相关链接的程序名
-r 显示路由信息,路由表
-e 显示扩展信息,例如uid等
-s 按各个协议进行统计
-c 每隔一个固定时间,执行该netstat命令。
提示:LISTEN和LISTENING的状态只有用-a或者-l才能看到
实用命令实例
1. 列出所有端口 (包括监听和未监听的)
列出所有端口 netstat -a
# netstat -a | more Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp00localhost:30037*:* LISTEN udp00*:bootpc *:* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix2[ ACC ] STREAM LISTENING6135/tmp/.X11-unix/X0 unix2[ ACC ] STREAM LISTENING5140/var/run/acpid.socket
列出所有 tcp 端口 netstat -at
列出所有 udp 端口 netstat -au
# netstat -au Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State udp00*:bootpc *:* udp00*:49119*:* udp00*:mdns *:*
2. 列出所有处于监听状态的 Sockets
只显示监听端口 netstat -l
# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp00localhost:ipp *:* LISTEN tcp600localhost:ipp [::]:* LISTEN udp00*:49119*:*
只列出所有监听 tcp 端口 netstat -lt
# netstat -lt Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp00localhost:30037*:* LISTEN tcp00*:smtp *:* LISTEN tcp600localhost:ipp [::]:* LISTEN
只列出所有监听 udp 端口 netstat -lu
# netstat -lu Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State udp00*:49119*:* udp00*:mdns *:*
只列出所有监听 UNIX 端口 netstat -lx
3. 显示每个协议的统计信息
显示所有端口的统计信息 netstat -s
# netstat -s Ip:11150total packets received1with invalid addresses0forwarded0incoming packets discarded11149incoming packets delivered11635requests sentoutIcmp:0ICMP messages received0input ICMP message failed. Tcp:582active connections openings2failed connection attempts25connection resets received Udp:1183packets received4packets to unknown port received. .....
显示 TCP 或 UDP 端口的统计信息 netstat -st 或 -su
# netstat -st # netstat -su
4. 在 netstat 输出中显示 PID 和进程名称 netstat -p
netstat -p 可以与其它开关一起使用,就可以添加 “PID/进程名称” 到 netstat 输出中,这样 debugging 的时候可以很方便的发现特定端口运行的程序。
# netstat -pt Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp10ramesh-laptop.loc:47212192.168.185.75:www CLOSE_WAIT2109/firefox tcp00ramesh-laptop.loc:52750lax:www ESTABLISHED2109/firefox
5. 在 netstat 输出中不显示主机,端口和用户名 (host, port or user)
当你不想让主机,端口和用户名显示,使用 netstat -n。将会使用数字代替那些名称。
同样可以加速输出,因为不用进行比对查询。
# netstat -an
如果只是不想让这三个名称中的一个被显示,使用以下命令
# netsat -a --numeric-ports # netsat -a --numeric-hosts # netsat -a --numeric-users
6. 持续输出 netstat 信息
netstat 将每隔一秒输出网络信息。
# netstat -c Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp00ramesh-laptop.loc:36130101-101-181-225.ama:www ESTABLISHED tcp11ramesh-laptop.loc:52564101.11.169.230:www CLOSING tcp00ramesh-laptop.loc:43758server-101-101-43-2:www ESTABLISHED tcp11ramesh-laptop.loc:42367101.101.34.101:www CLOSING ^C
7. 显示系统不支持的地址族 (Address Families)
netstat --verbose
在输出的末尾,会有如下的信息
netstat: no supportfor`AF IPX'on this system.netstat: no supportfor`AF AX25'on this system.netstat: no supportfor`AF X25'on this system.netstat: no supportfor`AF NETROM'on this system.
8. 显示核心路由信息 netstat -r
# netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface192.168.1.0*255.255.255.0U000eth2 link-local *255.255.0.0U000eth2default192.168.1.10.0.0.0UG000eth2
注意: 使用 netstat -rn 显示数字格式,不查询主机名称。
9. 找出程序运行的端口
并不是所有的进程都能找到,没有权限的会不显示,使用 root 权限查看所有的信息。
# netstat -ap | grep ssh tcp10dev-db:ssh101.174.100.22:39213CLOSE_WAIT - tcp10dev-db:ssh101.174.100.22:57643CLOSE_WAIT -
找出运行在指定端口的进程
# netstat -an | grep':80'
10. 显示网络接口列表
# netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth01500000000000BMU eth2150002619600026883600BMRU lo16436040004000LRU
显示详细信息,像是 ifconfig 使用 netstat -ie:
# netstat -ie Kernel Interface table eth0 Link encap:Ethernet HWaddr00:10:40:11:11:11UP BROADCAST MULTICAST MTU:1500Metric:1RX packets:0errors:0dropped:0overruns:0frame.:0TX packets:0errors:0dropped:0overruns:0carrier:0collisions:0txqueuelen:1000RX bytes:0(0.0B) TX bytes:0(0.0B) Memory:f6ae0000-f6b00000
11. IP和TCP分析
查看连接某服务端口最多的的IP地址
wss8848@ubuntu:~$ netstat -nat | grep"192.168.1.15:22"|awk'{print $5}'|awk -F:'{print $1}'|sort|uniq -c|sort -nr|head -2018221.136.168.363154.74.45.242278.173.31.236262.183.207.982192.168.1.142182.48.111.2152124.193.219.342119.145.41.22114.255.41.30175.102.11.99
TCP各种状态列表
wss8848@ubuntu:~$ netstat -nat |awk'{print $6}'established) Foreign LISTEN TIME_WAIT ESTABLISHED TIME_WAIT SYN_SENT
- <span style="line-height:1.5; font-size:14px"> 先把状态全都取出来,然后使用uniq -c统计,之后再进行排序。</span>
wss8848@ubuntu:~$ netstat -nat |awk'{print $6}'|sort|uniq -c143ESTABLISHED1FIN_WAIT11Foreign1LAST_ACK36LISTEN6SYN_SENT113TIME_WAIT1established)
相关阅读:
- Linux 硬链接与软链接 (zaza9084, 2015-4-22)
- Linux虚拟机共享Windows操作系统中文件的方法 (飘来今世, 2015-4-24)
- Linux系统启动流程 (zaza9084, 2015-4-24)
- 资源监控工具Spotlight监测LINUX (重爱, 2015-4-24)
- 【测试工具】Linux下查看指定进程的内存总和 (诸葛东明, 2015-4-27)
- Linux下使用Squid搭建代理服务器 (诸葛东明, 2015-4-27)
- 【测试工具】Linux限流工具 (诸葛东明, 2015-4-27)
- Linux Shell脚本面试25问 (zaza9084, 2015-4-29)
- SUSE Linux实现局域网时间同步 (zaza9084, 2015-4-30)
- linux-shell中如何进行一段代码的注释-zt (fairylly, 2015-4-30)
TAG: Linux
标题搜索
日历
|
|||||||||
日 | 一 | 二 | 三 | 四 | 五 | 六 | |||
1 | 2 | 3 | 4 | ||||||
5 | 6 | 7 | 8 | 9 | 10 | 11 | |||
12 | 13 | 14 | 15 | 16 | 17 | 18 | |||
19 | 20 | 21 | 22 | 23 | 24 | 25 | |||
26 | 27 | 28 | 29 | 30 | 31 |
我的存档
数据统计
- 访问量: 65197
- 日志数: 24
- 建立时间: 2010-06-18
- 更新时间: 2015-05-05
清空Cookie - 联系我们 - 51Testing软件测试网 - 交流论坛 - 空间列表 - 站点存档 - 升级自己的空间
Powered by 51Testing
© 2003-2021
沪ICP备05003035号