Python 3.10 有哪些新特性 ?

上一篇 / 下一篇  2021-06-23 13:14:19

  Python 3.10 的开发已经稳定下来,我们终于可以测试最终版本中将包含的所有新功能。下面我们将介绍 Python 3.10 中最有趣的一些新增功能——结构模式匹配、带括号的上下文管理器、 更多类型以及新的报错消息。
  结构模式匹配
  结构模式匹配是要添加到 Python 中的一个很棒的功能。想象一个如下所示的 if-else 语句(Python 3.9):
  http_code = "418"  
   if http_code == "200":  
   print("OK")  
   elif http_code == "404":  
   print("Not Found")  
   elif http_code == "418":  
   print("I'm a teapot")  
   else:  
   print("Code not found") 
  输出:
  I'm a teapot 
  Python 3.10 中可以这样写: 
  http_code = "418"  
     match http_code:  
     case"200":  
     print("OK")  
     case"404":  
     print("Not Found")  
     case"418":  
     print("I'm a teapot")  
     case _:  
     print("Code not found") 
  这就是新的 match-case语句——很酷,但目前还没有什么特别之处。使 match-case语句如此有趣的原因是一种称为结构模式匹配的东西。结构模式匹配允许我们执行相同的 match-case 逻辑,但基于我们的比较对象的结构是否与给定的模式匹配。
  因此,让我们定义两个字典,它们都具有不同的结构。
  dict_a = {  
  'id': 1,  
  'meta': {  
  'source': 'abc', 
  'location': 'west'  
  }  
  }  
  dict_b = {  
  'id': 2,  
  'source': 'def', 
  'location': 'west'  
  } 
  现在,我们可以编写一个模式来匹配 dict_a,如下所示:
  {  
  'id': int,  
  'meta': {'source': str,  
  'location': str}  
  } 
  还有一个匹配 dict_b的模式:
  {  
    'id': int,  
    'source': str,  
    'location': str  
    } 
  如果我们将这两个放在一个 match-case语句中,以及有效的 else/和包罗万象的 case_ - 我们得到:
  # loop through both dictionaries and a 'test'  
  for d in[dict_a, dict_b, 'test']:  
      match d:  
  case{'id': ident,  
  'meta': {'source': source,  
  'location': loc}}:  
  print(ident, source, loc)  
  case{'id': ident,  
  'source': source,  
  'location': loc}:  
  print(ident, source, loc)  
  case _:  
  print('no match') 
  输出结果:
  1 abc west  
  2def west  
  no match 
  是不是很酷?我已经发现这对数据处理非常有用。
  带括号的上下文管理器
  一个较小的变化是新的基于 PEG 的解析器。以前的 Python 解释器有很多限制,这限制了 Python 开发人员可以使用的语法。
  Python 3.9 的基于 PEG 的解析器消除了这些障碍,从长远来看,这可能会导致更优雅的语法——这种变化的第一个例子是新的带括号的上下文管理器。在 Python 3.9 之前,我们可以写这样的东西来打开两个(或更多)文件 I/O 流:
  with open('file1.txt', 'r') as fin, open('file2.txt', 'w') as fout:  
      fout.write(fin.read()) 
  第一行很长。但是由于解析器的限制,我们可以将此行拆分为多行的唯一方法是使用 \ 行继续符:
  with open('file1.txt', 'r') as fin, \  
       open('file2.txt', 'w') as fout:  
      fout.write(fin.read()) 
  它是有效的,但不是很 Pythonic。使用新的解析器,我们现在可以将括号将这一行拆分为多行,如下所示:
  with(open('file1.txt', 'r') as fin,  
        open('file2.txt', 'w') as fout):  
      fout.write(fin.read()) 
  这种写法很Pythonic。现在,在我们继续,如果我们写:
  with(open('file1.txt', 'r') as fin,  
         open('file2.txt', 'w') as fout):  
       fout.write(fin.read()) 
  在 Python 3.9 中也可以这样写。这是因为新的解析器启用了这种语法,尽管直到 Python 3.10 才被正式支持。
  Typing功能
  Python 的输入功能也有更多更新。这里最有趣的添加是包含了一个新的运算符,它的行为类似于类型的 OR 逻辑,我们之前使用 Union 方法来实现:
  from typing importUnion  
  def add(x: Union[int, float], y: Union[int, float]):  
  return x + y 
  现在,我们不需要写成 fromtypingimportUnion,并且 Union[int,float] 已经简化为 int|float,看起来更简洁:
  def add(x: int| float, y: int| float):  
  return x + y 
  更加完善的报错信息
  相信你第一次看到时都会去百度或者 Google 搜索:
  SyntaxError: unexpected EOF while parsing 
  输入 SyntaxError 时,Google 中排名第一的结果表明我们中的许多人确实在某个时候做过。
  这不是一条明确的报错消息,Python 中充满了不太明确的报错消息。幸运的是,有人注意到了它们——其中许多消息都得到了显著改善。
  官方更改列表中提到了更多改动 - 但在测试期间似乎没有显示,包括:
  from collections import namedtoplo  
   > AttributeError: module'collections' has no attribute 'namedtoplo'. Did you mean: namedtuple? 
  在这里, AttributeError 与之前相同,但增加了一个建议的属性名称—— namedtoplo 被标识为属性 namedtuple的潜在拼写错误。
  同样,我们看到 NameError消息也有相同的改进:
  new_var = 5  
  print(new_vr)  
  > NameError: name 'new_vr'isnotdefined. Did you mean: new_var? 
  总结
  以上是 Python 3.10 引入的一些关键新功能!
  完整版本预计于 2021 年 10 月 4 日发布,从现在开始,Python 开发人员将致力于改进已经添加的内容——但不会引入新功能。如果您想自己检查一下,可以从这里下载 3.10.0b1。

TAG: 软件开发 Python

 

评分:0

我来说两句

Open Toolbar