Boa Web Server缺陷报告及其修正方法

发表于:2015-1-16 10:25

字体: | 上一篇 | 下一篇 | 我要投稿

 作者:qq361301276    来源:51Testing软件测试网采编

  综述
  Boa 作为一种轻巧实用的 WEB 服务器广泛应用于嵌入式设备上,
  但 Boa 对实现动态网页的 CGI  的支持上仍存在一些缺陷,
  本文描述了 Boa 对 CGI 的 Status/Location 的支持的缺陷及其修正方法.
  版本: 所有版本 (0.94.13)
  缺陷: BOA 解析 CGI 应答头时不能完整处理 Status 和 Location
  缺陷描述:
  CGI/1.1 标准规定, CGI 脚本可以通过 Status 设置 HTTP 应答状态(如, Status: 500 Internal Error) 和
  Location 进行地址重定向 (如, Location: www.xxx.com), 而不管它们在应答头中的位置.
  Boa 支持 Stauts 和 Location 两种应答头, 但它的实现仅能正确处理 Stauts 和 Location 在应答第一行的
  CGI 应答. 这将给 CGI 程序的移植带来很多不便, 进而影响 Boa 作为Web Server 的功能的发挥.
  影响功能:
  ASP/PHP/JSP/Perl/... 等的 header, redirect, ... 等都会应用到 Stauts/Location 进行设置应答状态和
  地址重定向. Boa 的该实现将影响 CGI 脚本正常功能的使用.
  缺陷功能对比(对Status/Location的支持程序):
  Apache 1.3.x/2.x         IIS 4.x/5.x/6.X        Boa 0.9x                 thttpd                 mini-httpd
  完全支持                        完全支持                * 部分支持                 完全支持               完全支持
  缺陷分析
  缺陷分析
  CGI 应用程序进行应答时, 可以 HTTP 头进行有限的控制. 如,设置客户端不缓存页面可用下面的 C 脚本,
  HTTP/1.0: printf("Pragma: no-cache\n"); 或
  HTTP/1.1: printf("Cache-Control: no-cache; no-store\n");
  如果, 同时还需要告诉浏览器进行设置 Cookie 和控制相应状态(200 OK) 或地址重定向,
  那么就必须输出多行 http 头控制语句, CGI 支持两个解析头 "Status: " 和 "Loction: ",
  即协议规定, Web 服务器支持解析头时能使用 "Status: " 进行应答状态控制, 使用 "Location: " 进行地址重定向,
  并为应答添加状态头 "HTTP/1.0 302 Moved Temporarily\n" 或 "HTTP/1.1 302 Found\n".
  而不管它们在 CGI 应答头的什么位置.
  分析 Boa Source Code:
  cgi_header.c  Line 82-136 容易发现, Boa 只解析 CGI 应答的第一行, 是否为 "Status: ", "Location: ", 如下所示
23
24         int process_cgi_header(request * req)
25         {
26             char *buf;
27             char *c;
28
29             if (req->cgi_status != CGI_DONE)
30                 req->cgi_status = CGI_BUFFER;
31
32             buf = req->header_line;
33
34             c = strstr(buf, "\n\r\n");
35             if (c == NULL) {
36                 c = strstr(buf, "\n\n");
37                 if (c == NULL) {
38                     log_error_time();
39                     fputs("cgi_header: unable to find LFLF\n", stderr);
40         #ifdef FASCIST_LOGGING
41                     log_error_time();
42                     fprintf(stderr, "\"%s\"\n", buf);
43         #endif
44                     send_r_bad_gateway(req);
45                     return 0;
46                 }
47             }
48             if (req->simple) {
49                 if (*(c + 1) == '\r')
50                     req->header_line = c + 2;
51                 else
52                     req->header_line = c + 1;
53                 return 1;
54             }
55             if (!strncasecmp(buf, "Status: ", 8)) {
56                 req->header_line--;
57                 memcpy(req->header_line, "HTTP/1.0 ", 9);
58             } else if (!strncasecmp(buf, "Location: ", 10)) { /* got a location header */
59         #ifdef FASCIST_LOGGING
60
61                 log_error_time();
62                 fprintf(stderr, "%s:%d - found Location header \"%s\"\n",
63                         __FILE__, __LINE__, buf + 10);
64         #endif
65
66
67                 if (buf[10] == '/') {   /* virtual path */
68                     log_error_time();
69                     fprintf(stderr,
70                             "server does not support internal redirection: " \
71                             "\"%s\"\n", buf + 10);
72                     send_r_bad_request(req);
73
74                     /*
75                      * We (I, Jon) have declined to support absolute-path parsing
76                      * because I see it as a major security hole.
77                      * Location: /etc/passwd or Location: /etc/shadow is not funny.
78                      *
79                      * Also, the below code is borked.
80                      * request_uri could contain /cgi-bin/bob/extra_path
81                      */
82
83                     /*
84                        strcpy(req->request_uri, buf + 10);
85                        return internal_redirect(req);
86                      */
87                 } else {                /* URL */
88                     char *c2;
89                     c2 = strchr(buf + 10, '\n');
90                     /* c2 cannot ever equal NULL here because we already have found one */
91
92                     --c2;
93                     while (*c2 == '\r')
94                         --c2;
95                     ++c2;
96                     /* c2 now points to a '\r' or the '\n' */
97                     *c2++ = '\0';       /* end header */
98
99                     /* first next header, or is at req->header_end */
100                    while ((*c2 == '\n' || *c2 == '\r') && c2 < req->header_end)
101                        ++c2;
102                    if (c2 == req->header_end)
103                        send_r_moved_temp(req, buf + 10, "");
104                    else
105                        send_r_moved_temp(req, buf + 10, c2);
106                }
107                req->status = DONE;
108                return 1;
109            } else {                    /* not location and not status */
110                char *dest;
111                int howmuch;
112                send_r_request_ok(req); /* does not terminate */
113                /* got to do special things because
114                   a) we have a single buffer divided into 2 pieces
115                   b) we need to merge those pieces
116                   Easiest way is to memmove the cgi data backward until
117                   it touches the buffered data, then reset the cgi data pointers
118                 */
119                dest = req->buffer + req->buffer_end;
120                if (req->method == M_HEAD) {
121                    if (*(c + 1) == '\r')
122                        req->header_end = c + 2;
123                    else
124                        req->header_end = c + 1;
125                    req->cgi_status = CGI_DONE;
126                }
127                howmuch = req->header_end - req->header_line;
128
129                if (dest + howmuch > req->buffer + BUFFER_SIZE) {
130                    /* big problem */
131                    log_error_time();
130             fprintf(stderr, "Too much data to move! Aborting! %s %d\n",
131                    __FILE__, __LINE__);
132              /* reset buffer pointers because we already called
133                 send_r_request_ok... */
134              req->buffer_start = req->buffer_end = 0;
135              send_r_error(req);
136              return 0;
137          }
138          memmove(dest, req->header_line, howmuch);
139          req->buffer_end += howmuch;
140          req->header_line = req->buffer + req->buffer_end;
141          req->header_end = req->header_line;
142          req_flush(req);
143          if (req->method == M_HEAD)
144              return 0;
145      }
146      return 1;
147  }
148
149
21/212>
《2023软件测试行业现状调查报告》独家发布~

关注51Testing

联系我们

快捷面板 站点地图 联系我们 广告服务 关于我们 站长统计 发展历程

法律顾问:上海兰迪律师事务所 项棋律师
版权所有 上海博为峰软件技术股份有限公司 Copyright©51testing.com 2003-2024
投诉及意见反馈:webmaster@51testing.com; 业务联系:service@51testing.com 021-64471599-8017

沪ICP备05003035号

沪公网安备 31010102002173号